All Products
-
Measurement:
Electronic, digital and mechanical tester:
multimeter, insulation meter ...
-
[2123] HT-501 CO2 Tisch Monitor mit Software und Alarm
- Tisch-Monitor zur Anzeige der CO2-Konzentration, Temperatur und rel. Luftfeuchte mit USB und Netzteil
Available
-
[2132] HT-81 Anemometer mit Temperaturmessung
- Flügelrad-Anemometer zur Messung von Luftgeschwindigkeit mit Temperaturmessung, Einheiten: m/s, ft/min,
Knoten, km/h, mph, °C oder °F
Available
-
[1064] HP-866B Anemometer mit Temperaturmessung
- Flügelrad-Anemometer zur Messung von Luftgeschwindigkeit mit Temperaturmessung
Available
-
[1070] HP-8805 Anemometer mit Temperaturmessung und Farbdisplay
- Flügelrad-Anemometer zur Messung von Windgeschwindigkeit, Temperatur und gefühlter Temperatur, Beaufortskala
Available
-
[1121] HP-6236C Drehzahlmesser (Umdrehungsmesser, Tachometer), Laser und Kontakt
- Digitales Handmessgerät zur Messung der Umdrehungsgeschwindigkeit, 7 bis 99.999 Upm
Available
-
[1931] HP-2015 Auto-Batterie-Tester 12V
- Testgerät für 12V Akkus, Zustandstest, Start-Test, Belastungstest, Ladesystemtest.
Available
-
[1932] HP-26A Profi Auto-Batterie-Tester 6V/12V
- Testgerät für 6V oder 12V Blei-Säure-Akkus sowie 12V Blei-Säure Starterbatterien, Zustandstest,
Start-Test, Ladesystemtest.
Available
-
Measurement - Multimeters:
This category contains measurement: digital
multimeters and clamp meter, true rms multimeter
-
[1040] HP-33D Digital Multimeter ACV, DCV, DCA, Ω, hFE, diode
- Digital Multimeter HP-33D with holster, for alternate- and directvoltage, direct current, resistance, diode-
and transistor hFEtest.
Available
-
[1550] KDM90 Kompakt Multimeter 2000 Count
- Multimeter 2000 Counts, NCV, Taschenlampe, Display-Hintergrundbeleuchtung
Available
-
[1552] KDM100 Multimteter 10000 Count
- Multimeter 10.000 Counts mit True RMS und NCV
Available
-
[1555] KSM10 Smart Multimeter
- Smart Multimeter mit True RMS, 6.000 Counts und Touch-Bedienung
Available
-
[1041] HP-760B Digital Multimeter with maloperating blocker
- Digital Multimeter HP-760B, direct and alternate current andvoltage, resistance, capacitance, frequency,
transistor hFE- diode andcontinuity test, temperature
Available
-
[1541] HP-770B Multimeter NCV, Fehlbedienungssperre
- Digital Multimeter 20A mit berührungsloser Spannungserkennung, Fehlbedienungssperre, Temperaturmessung,
automatischer Beleuchtung und viel Zubehör
Available
-
[1565] KZM83 Zangen Multimeter AC/DC mA/A
- Zangen-Multimeter bis 200A mit NCV und Taschenlampe
Available
-
[1910] HP-6688G Multimeter mit True RMS, 40.000 Counts, extra robust
- Digital Multimeter 600A mit True RMS, 40.000 Counts, CATIII 1000V, Temperaturmessung und Zubehör
Available
-
Measurement - Infrared Thermometer:
IR thermometer for non-contact measurement:
products with fixed and regulated emissivity.
-
[1098] HP-981C Infrarot-Thermometer mit Messwertspeicher
- Digitaler Infrarot-Temperaturmesser -30-550°C, Messkegelverhältnis 8:1 mit Speicher, Emissivität
einstellbar.
Available
-
[1582] KIT03 Infrarot Thermometer 12:1 mit Farb LCD bis 600°C
- Digitaler Infrarot-Temperaturmesser -50-600°C, Messkegelverhältnis 12:1, Emissivität einstellbar 0,1 ~ 1,0,
LCD Farb-Display
Available
-
[1580] KIT02 Infrarot Thermometer mit Zusatzfühler, 12:1, -50-800°C
- Digitaler Infrarot-Temperaturmesser -50°C ~ 800°C (-58°F ~ 1472°F), Messkegelverhältnis 12:1, mit
zusätzlicher Kontaktmessung, Emissivität einstellbar
Available
-
[1095] HP-985C-APP Infrarot-Thermometer mit Bluetooth-Funktion
- Digitaler Infrarot-Temperaturmesser -50-800°C, Messkegelverhältnis 16:1 mit Speicher, Bluetooth-Funktion und
passender App, Emissivität einstellbar
Available
-
[1090] HP-1320 Infrarot-Thermometer 30:1, -50-1320°C, einstellbare Emissivität
- Digitaler Infrarot-Temperaturmesser Messbereich -50-1320°C mit einstellbarem Emissionsfaktor,
Messkegelverhältnis 30:1
Available
-
[1102] HP-1800C Infrarot-Thermometer mit Farbdisplay 50:1, -50-1800°C
- Digitaler Infrarot-Temperaturmesser, Farbdisplay, Messkegelverhältnis 50:1, -50-1800°C, einstellbare
Emissivität, zuschaltbare Laser-Zielhilfe, Display-Hintergrundbeleuchtung, Messung von Max./Min./Durchschnitt
Available
-
Measurement - Accessories:
Measurement Accessories, e.g. test leads, test
wires, thermocoupe, temperature probes
-
[1054] HP-705A Drehzahl-Induktionszange für Multimeter HP-90K
- Induktions-Messzange zum Anschluss an die Multimeter HP-90K, für Drehzahlmessung.
Available
-
[9014] Einfache Messleitungen 60cm mit Krokodilklemme
- 1 Paar Messleitungen, mit Bananenstecker und Krokodilklemme, einfache Ausführung bis max. 2A
Available
-
[9109] HP-9109 Prüfkabel-Set Kfz 90-tlg.
- Prüfkabel-Set für den Kfz-Bereich, 90-tlg.
Available
-
[9102] HP-9102 Messleitungen 4mm Stecker, 1000 mm lang je 1 x rot & schwarz
- Hochflexible Messleitungen 1m, mit 2x 4mm Bananenstecker als Büschelstecker
Available
-
[9103] HP-9103 Messleitungen 1000mm, mit Kroko-Klemme und Büschelstecker 4mm
- 1 Paar hochflexible Messkabel, 1m mit 4mm Bananenstecker und Krokodilklemme
Available
-
[9006] Aligator clips for Multimeter Test Leads
- 1 pair of crocodile clips, 1 x red, 1 x black, to slip on test leads with 4mm banana plug.
Available
-
[9013] KM-9013 Flexible Messleitungen für Multimeter 10A CAT III 1000V
- 1 Paar flexible Multimeter-Messkabel mit Spitze
Available
-
[9012] KM-9012 Flexible Messleitungen für Multimeter mit Krokoklemmen 10A
- 1 Paar flexible Multimeter-Messkabel mit Spitze und Krokoaufsätzen
Available
-
[9002] HP-9002 Test Leads for Multimeter with cowls
- 1 pair of multimeter measuring leads 1 x red, 1 x black.
Available
-
[9003] HP-9003 Test Leads for Multimeter 10A CAT III 600V
- 1 pair of multimeter measuring leads, 1 x red, 1 x black, 600V,10A, CATIII, double insulation.
Available
-
[9011] Temperatursensor für Multimeter Typ K mit 4mm Stecker kurz
- Temperaturfühler Typ K mit 15mm langen 4mm Steckern, -5 bis 400°C für Multimeter HP-760
Available
-
[9009] Thermocouple for Multimeter with Temperature Measurement
- Multimeter thermal element type K
Available
-
[9033] HP-7101 Tasche für Messgeräte klein
- Messgeräte-Schutztasche mit Reißverschluss und Schlaufe, 115 x 165 x 33 mm
Available
-
[9030] HP-7102 Tasche für Messgeräte mittel
- Messgeräte-Schutztasche mit Reißverschluss und Schlaufe, 125 x 215 x 45 mm
Delivery time on request
-
[2008] Batt-HP-5800 Akkutausch für HP-5800
- Austausch Akku HP-5800 für Partikelmesser HP-5800D und HP-5800S (Gerät muss eingeschickt werden)
Available
-
Power supplies:
electrical power supplies: regulated power
supply
-
[9014] Einfache Messleitungen 60cm mit Krokodilklemme
- 1 Paar Messleitungen, mit Bananenstecker und Krokodilklemme, einfache Ausführung bis max. 2A
Available
-
[9102] HP-9102 Messleitungen 4mm Stecker, 1000 mm lang je 1 x rot & schwarz
- Hochflexible Messleitungen 1m, mit 2x 4mm Bananenstecker als Büschelstecker
Available
-
[9103] HP-9103 Messleitungen 1000mm, mit Kroko-Klemme und Büschelstecker 4mm
- 1 Paar hochflexible Messkabel, 1m mit 4mm Bananenstecker und Krokodilklemme
Available
-
[9100] HP-9100 HQ Messleitungen Satz, Banane/Kroko, 2x Büschelstecker
- 3 Paar hochflexible Messkabel, 1m lang, 1 Paar mit Bananenstecker 4mm und Krokodilklemme sowie 2 Paar mit je
2x 4mm Bananenstecker
Available
-
[9015] Kaltgerätekabel, Stromkabel 3-polig, 230V, 10A, 150cm
- Kaltgerätekabel, 3-polig, 230V, 10A, 150cm
Available
-
Power supplies - Plug-in power supplies:
DC plug-in and small power supplies, e.g. for
LEDs, lamps, etc.
-
[99040] DC Steckernetzteil mit USB 5V= 500mA 2,5W
- DC Steckernetzteil mit USB Buchse 5V= / 500mA / 2,5W / USB Kabel mit Hohlstecker 3,5mm Durchmesser,
Kabellänge 120cm, LED Betriebs-Kontrolleuchte, Weitbereichseingang AC 100-240V~
Available
-
[99030] DC Steckernetzteil mit Schalter 5V= 750mA 3,75W
- DC Steckernetzteil mit Schalter 5V= / 750mA / 3,75W mit Hohlstecker 3,5mm Durchmesser, Kabellänge 75cm bis
Schalter plus 45cm bis Stecker, gesamt 120cm, Weitbereichseingang AC 100-240V~
Available
-
[99070] DC Steckernetzteil 12V= 1000mA 12W
- DC Steckernetzteil 12V= / 1000mA / 12W / 100cm Kabel mit PIN Stecker, Weitbereichseingang AC 100-240V~
Available
-
[99050] DC Steckernetzteil Schalter 12V= 1000mA 12W Terminal
- DC Steckernetzteil mit Schalter 12V= / 1000mA / 12W / 100cm Kabel mit vierfach Terminal, Weitbereichseingang
AC 100-240V~
Available
-
[99060] DC Steckernetzteil Schalter 12V= 1000mA 12W PIN Stecker
- DC Steckernetzteil mit Schalter 12V= / 1000mA / 12W / 100cm Kabel mit PIN Stecker, Weitbereichseingang AC
100-240V~
Available
-
[99005] KML-N-18 Ersatz-Netzteil 18,5V 10W für KML Lampen
- Ersatz-Stecker-Netzteil 18,5V / 10,2W für KML Lupenleuchten und Arbeitsleuchten
Available
-
[99004] KML-N-27 Ersatz-Netzteil 27,5V 20W für KML Lampen
- Ersatz-Stecker-Netzteil 27,5V / 20,6W für KML Lupenleuchten und Arbeitsleuchten
Available
-
[99080] DC LED Netzteil Treiber 17,5V= 350mA 6W
- DC Flachnetzteil für LED Lampen 17,5V= / 350mA / 6W / Eingang AC 220-240V~
Available
-
[99090] DC LED Netzteil Treiber 34V= 350mA 12W
- DC Flachnetzteil für LED Lampen 34V= / 350mA / 12W / Eingang AC 220-240V~
Available
-
Power supplies - Fixed voltage power supplies:
DC linear power supplies and switched-mode power
supplies with 13.8V for various areas of application
-
Power supplies - Laboratory power supplies:
Adjustable DC power supply units from 15V to
120V for various applications in the hobby and laboratory sector. Both liner power
supplies and switch mode power supplies are available.
-
[6542] PS1540 Labornetzgerät regelbar DC 15V= / 40A
- Regelbares Labornetzteil 0-15V, 0-40A, Schaltnetzteil mit aktiver Kühlung
Available
-
[6513] QJ3005P Regulated Power Supply, adjustable 30V/5A OCP programmable
- Regulated Power Supply 0-30V, 0-5A, adjustable, OCP-function, programmable and controllable via USB with PC
Available
-
[6508] QJ3005EIII Regulated Power Supply 2x 30V/5A adjustable, 1x 5V/3A fixed
- Regulated Power Supply; Output voltage: 2x 0-30V (adjustable), 1x5V (fixed), Output Current: 2x 0-5A
(adjustable), 1x 3A (fixed)
Available
-
[6544] QJ3005PIII Labornetzgerät, regelbar 2x DC 30V= / 5A digital programmierbar
- Regelbares Doppel-Labornetzteil 2x0-30V, 0-5A, programmierbar und steuerbar über USB mit PC
Available
-
[6536] PS3010N Labornetzgerät regelbar DC 30V= / 10A
- Regelbares Labornetzteil 0-30V, 0-10A, als Schaltnetzteil, aktive Kühlung mit Lüfter
Available
-
[6515] PS900W Regulated Power Supply 60V/15A, 30V/30A, 15V/60A
- Regulated Power Supply, 0-15V/0-60A, 0-30V/0-30A, 0-60V/0-15A, adjustable, switching power supply with active
cooling
Available
-
Air Purifier:
Air purifier for home, office or laboratory,
with different filters: HEPA, activated carbon, photocatalyst, static plasma, ion, ozon,
uv. Replacement filters and lamps.
-
[5090] Marreal AP2006 Luftreiniger HEPA H13 UVC WiFi 25m²
- Raumluftreiniger max. 62,5m³ (25m²), Vor,- HEPA-, Aktivkohlefilter, UV-Licht, Fotokatalysator,
Ionengenerator, Luftqualitätssensor, Nachtmodus, Automatikmodus, Luftzustandsanzeige, WLAN-Funktion,
Touch-Panel
Available
-
[5091] Marreal AP3006 Luftreiniger HEPA H13 UVC WiFi 43m²
- Raumluftreiniger max. 107,5m³ (43m²), Vor,- HEPA-, Aktivkohlefilter, UV-Licht, Fotokatalysator,
Ionengenerator, Luftqualitätssensor, Nachtmodus, Automatikmodus, Luftzustandsanzeige, WLAN-Funktion,
Touch-Panel
Available
-
[5092] Marreal AP6006 Luftreiniger HEPA H13 UVC WiFi 61m²
- Raumluftreiniger max. 152,5m³ (61m²), Vor,- HEPA-, Aktivkohlefilter, UV-Licht, Fotokatalysator,
Ionengenerator, Luftqualitätssensor, Nachtmodus, Automatikmodus, Luftzustandsanzeige, WLAN-Funktion,
Touch-Panel
Available
-
[5073] Marreal AP5001B Air purifier up to 80m² with HEPA H13 filter & UVC disinfection
- Air purifier max. 200m³ (80m²), Pre,- HEPA-, activated carbon filter, UV light, photocatalysis, ion
generator, odor- and particle sensor, night mode, automatic mode, 6 fan speeds, touch panel, air quality
indication (PM2.5 & VOC), remote control
Available
-
[5010] Baren B-757B Air Purifier with Ozon and Aroma
- Ambient air purifier B-757B up to 62,5m³ (25m²), remote control,HEPA and activated carbon filter, ozon,
photocatalysis, UV lamp, ions andaroma.
Available
-
[5004] Baren B-H04 Air Purifier white with Ozon, Aroma, Touchpanel, °C, %rH
- Air purifier Baren B-H04 in pearlwhite, up to 62,5m³ (25m²), with remote control, basic cleaning by HEPA and
activated carbon filter, switchable Ozon-, photocatalysis- and UV-light as well as ion generator and aroma.
Display with temperature and humidit
Available
-
[5030] Baren B-785 Air purifier 115m³/46m² B-785
- Baren B-785, 115m³/46m², Purification: HEPA, Activated Carbon, Fibre filter, Photo catalyst, UV-light, Ion,
Ozone (optional)
Available
-
[5003] Baren B-H03 Air purifier with PM2.5 sensor and display, touch panel, °C, %rH
- Air purifier B-H03, pearlwhite, up to max. 115m³, HEPA-, activated carbon-, fibre-filter, UV-light, photo
catalyst, ion, ozone generator, odor- and particle sensor, sleep mode, touch panel
Available
-
[5009] Baren B-H03-Si Air purifier up to 46m² with HEPA H13 filter & UVC disinfection
- Air purifier B-H03, silver, up to max. 115m³, HEPA-, activated carbon-, fibre-filter, UV-light, photo
catalyst, ion, ozone generator, odor- and particle sensor, sleep mode, touch panel
Available
-
Air Purifier - Air Purifier Accessories:
Accessories for air purifier like filters, uv
lamps
-
Soldering:
all you need for soldering: soldering stations,
soldering kits, desoldering pumps
-
[4617] ZD-967 Soldering Set with Accessoires
- Set with more than soldering iron (20/130W), iron stand,desoldering pump, solder wire, multimeter, box of
electronic screwdrivers,component storage box, different screwdrivers, soldering aid kit and pliersin a bag
with zip.
Available
-
[4601] ZD-20G Kabelloser Lötkolben mit Ablage als Ladestation
- Lötkolben mit Akku und Ladestation in der Lötkolbenablage, mit Metallschwamm.
Available
-
[4602] ZD-8950 Regelbarer digitaler Lötkolben mit Zubehör
- Regelbarer Lötkolben mit Temperaturanzeige, Lötkolbenablage, Steckernetzteil 24V, 4 Ersatzspitzen und
Lötzinn im Spender.
Available
-
[4800] ZD-928 Adjustable soldering station 8W
- Adjustable 12V soldering station 8W, 100-450°C for precision work
Delivery time on request
-
[3501] KLS460 Regelbare digitale Lötstation 60W ESD
- Digitale ESD Lötstation mit 24V AC Ausgangsspannung, 60W, 180 bis 450° einschl. Lötkolbenhalter mit Schwamm
Available
-
[4803] ZD-931ESD Digital Soldering Station ESD
- Temperature controlled solder Station ZD-931, ESD-safe, with digital display of target- and actual
temperature, including soldering iron with tip, iron holder and sponge in drawer.
Available
-
[4554] ZD-931KIT Digital Soldering Station ESD with accessories
- Temperature controlled solder Station ZD-931, ESD-safe, with digital display of target- and actual
temperature, including iron holder and drawer, helping hand with magnifying glass, desoldering pump, brush,
scraper and soldering tin
Available
-
[4804] ZD-937 Digital regulated Soldering Station, pre-selction buttons, ESD
- Soldering Station ZD-937, black, 150°C - 450°C, 48W,ESD-protection, with pre-selection buttons 200, 300,
400°C.
Available
-
[4556] ZD-937ESD-KIT Digital regulated Soldering Station ESD black with accessories
- Soldering Station ZD-937, 150°C - 450°C, 48W, ESD, with pre-selection buttons 200, 300, 400°C, including 4
soldering tips, helping hand with magnifying glass, desoldering pump, brush, scraper, desoldering wire,
Kolophoninum and soldering tin
Available
-
[4560] ZD-8961-E Regelbare digitale Lötstation 60W Set
- Regelbare Lötstation 50W, 160-480°C, 24V Lötkolben und viel Zubehör
Available
-
[4806] ZD-915ESD Digital Desolder Station ESD
- Desoldering station ZD-915, ESD-safe, with short heating updesoldering gun, digital display with target and
actual value oftemperature
Delivery time on request
-
[4542] ZD-8917-ESD Soldering & Desoldering Station ESD with 2 displays
- Regulated dual-soldering station with soldering iron and desordering gun, ESD-protection, 160-480°C
Available
-
[4810] ZD-511 Mini Heißluft Kolben 350°C
- Heißluftkolben 350°C 300W
Available
-
[4811] ZD-8911B Lötpot 300W
- Löttopf mit Temperaturregelung, 300W, Temperaturbereich 200-420°C, Schmelzzeit 10-30 Minuten, Kapazität
Max. 1350gr
Available
-
Soldering - Accessories+Replacement:
Accessories like Iron Stand, Smoke Absorber and
Replacements like solder Iron, Heater, Desolerfing Gun
-
[4922] ZD-154-1A Lötunterlage, hitzebeständig
- Silikon Lötunterlage für Lötarbeiten, hitzebeständig
Available
-
[4923] ZD-154-1C Lötunterlage, hitzebeständig, ESD
- Silikon Lötunterlage für Lötarbeiten, hitzebeständig, ESD-Schutz
Available
-
[4629] ZD-11K Lötkolbenhalter
- Lötkolbenhalter zum Einklemmen eines Lötkolbens
Available
-
[4613] ZD-10D Helping Hand with Magnifier
- Component holder from nickel-plated steel with 2 flexible clip terminals, magnifier (2.5-times) and heavy
screw feet.
Available
-
[4625] ZD-10Y Magnifier lamp with helping hand, soldering iron holder, scraper
- Workpiece holder with alligator clips, illuminated magnifier, soldering iron holder and accessories
Available
-
[9052] Lötkolbenablage mit Schublade und Schwamm, schwarz
- Ablage für Lötkolben mit Schwammschublade, auch passend als Ersatzteil für die Lötstation ZD-937
Available
-
[9051] Lötkolbenablage mit Schublade und Schwamm, blau
- Ablage für Lötkolben mit Schwammschublade, auch passend als Ersatzteil für die Lötstation ZD-931
Available
-
[3503] KLS-L Ersatz-Lötkolben für Lötstation KLS-460 und KLS-875
- Ersatz-Lötkolben für Lötstationen KLS-460 KLS-875, 24V, 60 Watt, inklusive Lötspitze 1,5mm
Available
-
[4642] ZD-418B Ersatz-Lötkolben für ZD-8916, ZD-8917
- Ersatz-Lötkolben für Lötstationen ZD-8916, ZD-8917 inklusive Lötspitze N4-2 (1,0mm), 24V, 60W, 6-poliger
Stecker
Available
-
[4009] ZD-931-I Soldering Iron for ZD-931 and ZD-937
- Solder iron as a spare part suitable for solder stations ZD-931 and ZD-937 as well as McVoice LS-1000 and
LS-450, 24V, 48W, solder tip 1.5mm included.
Delivery time on request
-
[4646] ZD-552A Desoldering Gun for ZD-915 and ZD-917
- Replacement desolder iron ZD-552, 24V, 80W (130W) including desoldering tip N5-2 (1,0mm), for desoldering
station ZD-915 and combined solder station ZD-917
Delivery time on request
-
[4662] Ersatz Glastank für Entlötpistole ZD-552
-
Available
-
[4703] ZD-915FILTER 10 Replacement Filter
- 10 filter for desolder iron, diameter 17 und 20,8mm
Available
-
[99007] Anschlusshülse Vakuumschlauch für ZD-915
- Überwurfmutter zum Anschluß des Vakuumschlauchs der Entlötpistole ZD-552B an die Lötstation ZD-915
Available
-
[99008] Anschlusshülse Vakuumschlauch für ZD-8917
- Überwurfmutter zum Anschluß des Vakuumschlauchs der Entlötpistole ZD-553B an die Lötstation ZD-8917
Available
-
[99010] Hülse mit Überwurfmutter Entlötpistole ZD-552B
- Hülse mit Überwurfmutter für die Entlötpistole ZD-552B der Entlötstation ZD-915
Available
-
[99011] Hülse mit Überwurfmutter Entlötpistole ZD-553B
- Hülse mit Überwurfmutter für die Entlötpistole ZD-553B der Entlötstation ZD-8917
Available
-
[99020] Halterung für Entlötpistole ZD-552B der Entlötstation ZD-915
- Entlötpistolenhalterung inklusive Lötschwamm für die Entlötpistole ZD-552B der Entlötstation ZD-915
Available
-
Soldering - Soldering Tips:
soldering tips
-
[4901] ZD-99TIP Soldering Tips for ZD-98, ZD-99, ZD-8906
- Set of Replacement soldering tips for soldering stations ZD-98 and ZD-99/48W: 0.5, 1.5, 2.0, 3.0 mm
Available
-
[4910] ZD-8919TIP Lötspitzen für ZD-8919
- 5 Stück Lötspitzen passend für den Lötkolben der Lötstation ZD-8919
Available
-
[4645] N4-3 Soldering Tip 3.0mm for Solder Iron ZD-415 and ZD-415B
- Replacement soldering tip N4-3, 3.0mm, suitable for soldering irons ZD-415 and ZD-415B of solder stations
ZD-912, ZD-916, ZD-917, ZD-982, ZD-987
Available
-
[4900] D3-2 2 Stück Lötspitzen für ZD-927 und ZD-928
- 2 Stück Ersatz-Lötspitzen für Lötstationen ZD-927 und ZD-928
Available
-
Soldering - Nozzles:
Hot Air Nozzles for hot air solder stations
(nozzles)
-
[4670] 12 Heißluft-Düsen verschiedene Formen und Durchmesser
- 12 Stück Aufsatzdüsen passend für Heißluft-Lötstationen ZD-912, ZD-9812, ZD-982, ZD-939, KLC875, AT8502D
und SMD-01
Available
-
[4671] 79-3901 SMD-nozzle for hot-air-soldering, diameter 2.5mm
- Nozzle suitable for hot air solder station ZD-912, ZD-9812, ZD-982, ZD-939, KLC875, AT8502D and SMD-01
Available
-
[4672] 79-3902 Nozzle for hot-air-soldering, 10x10mm
- Nozzle suitable for hot air solder station ZD-912, ZD-9812, ZD-982, ZD-939, KLC875, AT8502D and SMD-01
Available
-
[4682] 79-3929 Nozzle for hot-air-soldering, 1.5x3mm
- Nozzle suitable for hot air solder station ZD-912, ZD-9812, ZD-982, ZD-939, KLC875, AT8502D and SMD-01
Available
-
Soldering - Consumable:
soldering wire, desoldering wire, filter
-
Lamps + Light:
Lams, magnifier lamps
-
[5245] KML-9102-W 6W Arbeitsleuchte
- Arbeitsleuchte mit Gelenkarm, 30 LEDs, 6W
Available
-
[5269] KML 9603LED-12 Ringleuchte 10W mit Handy-Stativ und Fernbedienung
- Ringlicht mit Handy-Stativ, ideal für TikTok, Instagram, Facebook oder Youtube Selfie Videos mit perfekter
Ausleuchtung. Inklusive Fernbedienung
Available
-
[5268] KML-9602LED CCT Fotoleuchte Videoleuchte mit Stativ, LED 40 Watt
- Doppel-Arbeitsleuchte mit Stativ, 40W, 5400 Lumen, Lichttemperatur 3000K ~ 6000K, Dimmer
Available
-
[5240] KML-9501ESD 21,5W work lamp black with ESD protection and dimmer
- Work lamp with jointed arm, ESD protection, 117 LEDs, 21,5W, 2600 lumen, light temperature 6900K, dimmer,
color black
Available
-
[5248] KML-9501LED-SI 21,5W Arbeitsleuchte silber mit Dimmer
- Arbeitsleuchte mit Gelenkarm, 117 LEDs, 21,5W, 2600 Lumen, Lichttemperatur 6900K, Dimmer
Available
-
[5243] KML-9503LED 16,4W work lamp with variable light temperature 3000-6700k
- Work lamp with jointed arm, 182 LEDs, 16,4W, 1950 lumen, light temperature adjustable 3000K, 4500k or 6700K,
dimmer
Available
-
[5246] KML-9503LED-SW 16,4W Arbeitsleuchte schwarz, variable Lichttemperatur, Dimmer
- Arbeitsleuchte mit Gelenkarm, schwarz, 182 LEDs, 16,4W, 1950 Lumen, Lichttemperatur einstellbar 3000K, 4500k
oder 6700K, Dimmer
Available
-
[5247] KML-9503LED-SI 16,4W Arbeitsleuchte silber, variable Lichttemperatur, Dimmer
- Arbeitsleuchte mit Gelenkarm, silber, 182 LEDs, 16,4W, 1950 Lumen, Lichttemperatur einstellbar 3000K, 4500k
oder 6700K, Dimmer
Available
-
[5261] KML-9507-CCT-SI 40W Arbeitsleuchte, variable Lichttemperatur, Dimmer
- Arbeitsleuchte mit Gelenkarm, 540 LEDs, 40W, max. 6000 Lumen, Lichttemperatur einstellbar zwischen 3000K und
6700K, dimmbar
Available
-
[5265] KML-9509-CCT-BLACK Arbeitsleuchte 30 Watt, Schwanenhals, Dimmer, schwarz
- Arbeitsleuchte mit Schwanenhals, 324 LEDs, 30W, max. 3800Lumen, Lichttemperatur einstellbar zwischen 2800K und
6500K, dimmbar
Available
-
[5343] KML-9503LED-FS2 16,4W work lamp with dimmer and wheeled stand
- Work lamp with jointed arm and wheeled stand FS2, 182 LEDs, 16,4W, 1950 lumen, light temperature adjustable
3000K, 4500k or 6700K, dimmer
Available
-
Lamps + Light - Magnifier Lamps:
Magnifier lamps with different diameter and
diopters with hinged bracket or for table
-
[5224] KML-9101LED-B-C 10W Tisch-Lupenleuchte mit Klemme 5-D, Dimmer
- Lupenlampe als Tischleuchte mit Klemmfuß, Farbe weiß, 60LEDs, 10W, Kunststoff-Lampenschirm mit 125mm Linse,
5 Dioptrien, dimmbar.
Available
-
[5232] KML-9003LED-3D 10W Magnifier lamp 3-D with dimmer
- White cold light magnifier lamp with lens of glass, 125mm, 3 dioptres, color white, as jointed arm lamp with
table clamp, 60 LEDs, plastic lampshade, 10W, dimmable
Available
-
[5233] KML-9003LED-5D 10W Magnifier lamp 5-D with dimmer
- White cold light magnifier lamp with lens of glass, 125mm, 5 dioptres, color white, as jointed arm lamp with
table clamp, 60 LEDs, plastic lampshade, 10W, dimmable
Available
-
[5234] KML-9003LED-8D 10W Magnifier lamp 125mm 8-D with dimmer
- White cold light magnifier lamp with lens of glass, 125mm, 8 dioptres, color white, as jointed arm lamp with
table clamp, 60 LEDs, plastic lampshade, 10W, dimmable
Delivery time on request
-
[5230] KML-9006LED-127 ESD ESD Lupenleuchte schwarz, 127mm, 5D + 8D Wechsellinse, 10W
- Kaltlicht-Lupenlampe mit Wechsellinse aus Glas, 127mm, inkl 5-Dioptrien-Linse und 8-Dioptrien-Linse, Farbe
schwarz, ESD-Schutz, Gelenkarm-Leuchte mit Tischklemme, 60 LEDs, Kunststoff-Lampenschirm, 10W, Dimmer
Available
-
[5235] KML-9006LED-150 10,3W Magnifier lamp with 5D changeable lens
- White cold light magnifier lamp with changeable lens of glass, 150mm, 5 dioptres (replacement lenses optional
available), color white, as jointed arm lamp with table clamp, 60 LEDs, plastic lampshade, 10,3W
Delivery time on request
-
[5228] KML-9007LED Tisch-Lupenleuchte 5D, 125mm, 60 LEDs, 10W, Schwanenhals
- Lupenlampe als Tischleuchte, Farbe weiß, 60LEDs, 10W, Kunststoff-Lampenschirm mit 125mm Linse, 5 Dioptrien,
Schwanenhals, mit Dimmer
Available
-
[5231] KML-9002LED 11W Magnifier lamp 5-D with dimmer
- White cold light magnifier lamp as jointed arm lamp with table clamp, with 2x30 LEDs and 190x157mm lens of
glas with 5 dioptres, color: white, 11W, dimmable
Available
-
[5237] KML-9001 10W UV + Kaltlicht-Lupenleuchte 5D
- Schwarze Kaltlicht-Lupenlampe mit UV-Licht-Funktion, 127mm, 5 Dioptrien, Farbe schwarz, als Gelenkarm-Leuchte
mit Tischklemme, 60 LEDs, Kunststoff-Lampenschirm, 10W
Available
-
Lamps + Light - Magnifier Lamps - Stand Magnifier Lamps:
Magnifier lamps with stand
-
[5332] KML-9003-3D-FS2 10W Magnifier lamp 3-D with dimmer and wheeled stand
- Cold light magnifier lamp with wheeled stand and 125mm 3-dioptres lens of glass, color white, 60 LEDs, plastic
lampshade, 10W, dimmable
Available
-
[5333] KML-9003-5D-FS2 10W Magnifier lamp 5-D with dimmer and wheeled stand
- Cold light magnifier lamp with wheeled stand and 125mm 5-dioptres lens of glass, color white, 60 LEDs, plastic
lampshade, 10W, dimmable
Available
-
[5334] KML-9003-8D-FS2 10W Magnifier lamp 8-D with dimmer and wheeled stand
- Cold light magnifier lamp with wheeled stand and 125mm 8-dioptres lens of glass, color white, 60 LEDs, plastic
lampshade, 10W, dimmable
Available
-
[5335] KML-9006LED-FS2 10,3W Magnifier lamp 5D with changeable lens and wheeled stand
- Cold light magnifier lamp with wheeled stand and 150mm 5-dioptres changeable lens of glass (replacement lenses
optional available), color white, 60 LEDs, plastic lampshade, 10,3W
Available
-
[5231S] KML-9002LED-FS2 11W Magnifier lamp 5-D with wheeled stand and dimmer
- White cold light magnifier lamp with wheeled stand and 190x157mm 5 dioptres lens of glas, as jointed arm lamp
with 2x30 LEDs, color white, 11W, dimmable
Available
-
Lamps + Light - Magnifier Lamps - Stands and Accessories:
Stands with rols, replacement lenses, wall
bracket
-
[99005] KML-N-18 Ersatz-Netzteil 18,5V 10W für KML Lampen
- Ersatz-Stecker-Netzteil 18,5V / 10,2W für KML Lupenleuchten und Arbeitsleuchten
Available
-
[99004] KML-N-27 Ersatz-Netzteil 27,5V 20W für KML Lampen
- Ersatz-Stecker-Netzteil 27,5V / 20,6W für KML Lupenleuchten und Arbeitsleuchten
Available
-
[5137] KML-TK2 Tischklemme groß mit wenig Überstand für Lupenleuchten
- Schmale Ersatz-Tischklemme mit 13mm Bohrung für Lupenleuchten mit 12,5mm
Available
-
[5136] KML-TH1 Tischhalterung
- Tischhalterung für Lupen- oder Arbeitsleuchten mit Gelenkarm
Available
-
[5119] WB Wall Bracket for Magnifier Lamps
- Wall Bracket for Magnifier Lamps, color: white
Available
-
[5290] KML-FS2 Wheeled stand for magnifier lamp
- Heavy stand for magnifier lamp with 5 wheels, 705mm high
Available
-
[5298-3] KML-FS-T Ablagefächer (3 Stück) für Rollstativ FS2 und FS3
- 3 Stück runde Ablagen zum Aufstecken auf die Rollstative FS2 und FS3, Durchmesser ca. 27cm
Available
-
[5284] KML-9006-WL-5-20D Replacement lens 5/20 dioptres 150mm
- Replacement lens 150mm with 5+20 dioptres for magnifier lamp KML-9006
Available
-
[5285] KML-9006-WL-8-15D Replacement lens 8/10/12/15 dioptres 150mm
- Replacement lens 150mm with 8,10,12 and dioptres for magnifier lamp KML-9006
Available
-
[5273] KML-9006-WL-3-20D-178 Replacement lens 3/20 dioptres 178mm
- Replacement lens 178mm with 3+20 dioptres for magnifier lamp KML-9006-178
Available
-
[5274] KML-9006-WL-5-20D-178 Replacement lens 5/20 dioptres 178mm
- Replacement lens 178mm with 5+20 dioptres for magnifier lamp KML-9006-178
Available
-
[5115] Ersatzlinse 3 Dioptrien für Lupenleuchte 125 mm
- Austauschlinse mit 3 Dioptrien für Lupenleuchte mit 125mm (5 Zoll) Glaslinse
Available
-
Tools:
Solder and electronic kits, helping hand,
magnifier lamp
-
[4617] ZD-967 Soldering Set with Accessoires
- Set with more than soldering iron (20/130W), iron stand,desoldering pump, solder wire, multimeter, box of
electronic screwdrivers,component storage box, different screwdrivers, soldering aid kit and pliersin a bag
with zip.
Available
-
[4992] ZD-199B Vakuum-Stift als Montagehelfer, Platzierhilfe, mechanisch
- Zum Aufnehmen und Platzieren von Präzisionsteilen, ESD-Schutz
Available
-
[4991] ZD-199 Vakuum-Stift als Montagehelfer, Platzierhilfe, elektrisch
- Zum Aufnehmen und Platzieren von Präzisionsteilen, ESD-Schutz, ohne Batterie
Available
-
[4613] ZD-10D Helping Hand with Magnifier
- Component holder from nickel-plated steel with 2 flexible clip terminals, magnifier (2.5-times) and heavy
screw feet.
Available
-
[4625] ZD-10Y Magnifier lamp with helping hand, soldering iron holder, scraper
- Workpiece holder with alligator clips, illuminated magnifier, soldering iron holder and accessories
Available
-
[4631] ZD-182 Automatischer Lötspitzen Reiniger
- Lötspitzenreiniger mit Doppelfunktion: zur Lötzinn- und Oxidentfernung
Available
-
[4641] ZD-20KH Styroporschneider, batteriebetrieben
- Heißschneide-Werkzeug zum Schneiden von Schaumstoffplatten bis zu einer maximalen Stärke von 50mm und einer
Arbeitstiefe von 180mm.
Available
-
[4628] ZD-507ESK Satz Ersatz-Messer ZD-507E
- Ersatzklingen für Heißschneide-Werkzeug ZD-507
Available
-
LED Glass Decoration:
Crystal glass items with laser engraving, LED
sockets for engraving items.
-
LED Glass Decoration - LED-Socket:
LED illuminated base for illuminating
transparent objects, crystal glass engraving.
-
LED Glass Decoration - Love-Motifs:
A very special declaration of love to your
partner, optionally with personalized lettering
-
LED Glass Decoration - Zodiac Signs:
All 12 zodiac signs as 3D motifs, can be
personalized with name and date
-
LED Glass Decoration - Christmas-Motifs:
Various 3D crystals with Christmas motifs, the
lettering can also be customized.
-
Miscellaneous + Remnats:
All what you cannot find in other category,
above all remnats and special items.
-
Special Offer:
-
[9300] FM/DAB-Antennen-Splitter CK-1
- DAB+/FM Antennen Splitter Radio Adapter
Available
-
[5090] Marreal AP2006 Luftreiniger HEPA H13 UVC WiFi 25m²
- Raumluftreiniger max. 62,5m³ (25m²), Vor,- HEPA-, Aktivkohlefilter, UV-Licht, Fotokatalysator,
Ionengenerator, Luftqualitätssensor, Nachtmodus, Automatikmodus, Luftzustandsanzeige, WLAN-Funktion,
Touch-Panel
Available
-
[5091] Marreal AP3006 Luftreiniger HEPA H13 UVC WiFi 43m²
- Raumluftreiniger max. 107,5m³ (43m²), Vor,- HEPA-, Aktivkohlefilter, UV-Licht, Fotokatalysator,
Ionengenerator, Luftqualitätssensor, Nachtmodus, Automatikmodus, Luftzustandsanzeige, WLAN-Funktion,
Touch-Panel
Available
-
[5092] Marreal AP6006 Luftreiniger HEPA H13 UVC WiFi 61m²
- Raumluftreiniger max. 152,5m³ (61m²), Vor,- HEPA-, Aktivkohlefilter, UV-Licht, Fotokatalysator,
Ionengenerator, Luftqualitätssensor, Nachtmodus, Automatikmodus, Luftzustandsanzeige, WLAN-Funktion,
Touch-Panel
Available
-
[5073] Marreal AP5001B Air purifier up to 80m² with HEPA H13 filter & UVC disinfection
- Air purifier max. 200m³ (80m²), Pre,- HEPA-, activated carbon filter, UV light, photocatalysis, ion
generator, odor- and particle sensor, night mode, automatic mode, 6 fan speeds, touch panel, air quality
indication (PM2.5 & VOC), remote control
Available
-
[5003] Baren B-H03 Air purifier with PM2.5 sensor and display, touch panel, °C, %rH
- Air purifier B-H03, pearlwhite, up to max. 115m³, HEPA-, activated carbon-, fibre-filter, UV-light, photo
catalyst, ion, ozone generator, odor- and particle sensor, sleep mode, touch panel
Available
-
[5009] Baren B-H03-Si Air purifier up to 46m² with HEPA H13 filter & UVC disinfection
- Air purifier B-H03, silver, up to max. 115m³, HEPA-, activated carbon-, fibre-filter, UV-light, photo
catalyst, ion, ozone generator, odor- and particle sensor, sleep mode, touch panel
Available
-
[3501] KLS460 Regelbare digitale Lötstation 60W ESD
- Digitale ESD Lötstation mit 24V AC Ausgangsspannung, 60W, 180 bis 450° einschl. Lötkolbenhalter mit Schwamm
Available
-
[3503] KLS-L Ersatz-Lötkolben für Lötstation KLS-460 und KLS-875
- Ersatz-Lötkolben für Lötstationen KLS-460 KLS-875, 24V, 60 Watt, inklusive Lötspitze 1,5mm
Available