|
|
|
 |
- Measurement:
Electronic, digital and mechanical tester: multimeter, digital calipers an micrometers, insulation meter, earth resistance tester
-
[1033] Magnetic Field Meter
- The EMF meter TM-191 is applied to measuring electromagnetic field radiation of extremely low frequency (ELF 30-300Hz) in gauss or tesla.
-
[1221] Solar Power Meter
- Solar power meter TM-208 measures the radiant energy in W/m² up to 1999 W/m² with a resolution of 1 W/m² including all visible light.
-
[1141] Temperatur- und Feuchtemesser mit Taupunktanzeige
- VA-8010: Psychrometer mit Feuchtemessung, Temperaturmessung und Taupunkt-Temperaturanzeige mit Abdeckkappe und Transportkoffer
Estimated availability: Monday 12 April, 2010.
-
[1210] Field Strength Meter
- RF field strength meter TM-194, designed to measuring and monitoring electromagnetic field value (0,002-2,7mW/cm²) of radio-frequency between 50MHz and 3,5GHz or 2,45GHz.
-
[1220] Solar Power Meter
- Solar power meter TM-206 measures the radiant energy in W/m² up to 1999 W/m² with a resolution of 1 W/m² including all visible light.
-
[1000] Installationsmessgerät HP-5500
- Multifunktionsmesser für Erdwiderstand, Erdspannung, Isolationswiderstand und Drehrichtung mit entsprechendem Zubehör im Transportkoffer.
-
[1001] Digital Insulation Meter
- Insulation Meter HP-6303 with lighted display
-
[1035] Calibrator V/mA
- Calibrator for direct voltage mV/V and direct current mA
-
[1044] Thermocouple Process Kalibrator
- This Thermocouple Process Calibrator can measure or simulate 8 difference types of thermocouples (°C or °F).
-
[1037] Process Calibrator for Resistancre and RTD
- Exactitude measurement and source instrument can be used to calibrate the RTD (Resistance Temperature Detector) transmitter (include most impulse transmitter)
-
[1082] Erdungsmesszange HP-8000, 32x65mm Innendurchmesser
- Erdungsmessgerät mit Zange, 32x64mm Durchmesser, für Widerstand und Strom, mit Speicher- und Alarmfunktion im Transportkoffer mit Testschleife
Estimated availability: Monday 15 March, 2010.
-
[1083] Erdungsmessgerät HP-910
- Erdungsmesser zur Prüfung von Erdungen (Erdwiderstand und Erdspannung), z.B. von Haus- und Gebäudeerden mit 2 Hilfs-Erdspießen und 4 Messkabeln im Transportkoffer
-
[1039] SMD-Scanner f. Widerstände und Kondensatoren
- Meßpinzette VA-505B zum Messen von Widerständen, Kondensatoren, Dioden- und Durchgang direkt auf der Platine.
-
[1055] Kapazitäts-Messgerät HP-36D
- Digitales Messgerät zur Kapazitätsmessung HP 36D, mit 9 Messbereichen von 0,1pF bis 20mF (20.000μF) mit Display-Hintergrundbeleuchtung.
-
[1054] LCR Multimeter HP-4070L
- Digitales Multimeter zur Messung von Widerstand, Kapazität, Induktivität und Transistor hFE-Testmit Display-Hintergrundbeleuchtung.
-
[1161] Beleuchtungsmessgerät mit festem Sensor (Luxmeter)
- Digitales Luxmeter VA-8050, LCD mit Hintergrundbeleuchtung, 90.000lx, mit festem Sensor in Aufbewahrungsbox
-
[1061] Digital Luxmeter
- Digital Luxmeter HP-1010B, 18mm LCD, 1-50.000Lux
Estimated availability: Monday 15 March, 2010.
-
[1062] Digital Anemometer
- Digital Anemometer HP-816, for wind speed and wind temperature
-
[1007] Schallpegel-Messgerät, 30-120dB
- Eichfähiges Schallmeßgerät VA-8080, IEC 651 Typ 2, LCD, A-Kennliniencharakteristik im Transportkoffer.
-
[1009] Schallpegel-Meßgerät HP-843, 30-130 dB, LCD, USB
- Eichfähiges Schallmeßgerät, Klasse 2, HP-834 mit Kondensatormikrofon, LCD, Speichermöglichkeit, A+C-Kennliniencharakteristik, PC-Schnittstelle über USB, Kalenderfunktion, AC/DC-Ausgang im Transportkoffer
-
[1131] Ultraschall-Kabelhöhenmesser 3-23m - Sonderpreis Einzelstück
- Digitaler Ultraschall-Entfernungsmesser zum Messen von Freileitungen bis 23m Höhe oder Distanzen zu flächigen Objekten mittels Adapter.
-
[1029] Kontakt-Thermometer mit Sonde und Schutzkappe
- Digitales Temperaturmesser mit 62mm Einstichsonde, besonders geeignet als Lebensmittelthermometer oder zum Messen von Flüssigkeiten.
-
[1171] Thermometer für 2 Temperaturen
- Digitales Temperaturmessgerät -100 bis 1300°C, zum gleichzeitigem Messen von 2 Temperaturen mittels Thermoelementen.
-
[1101] Laser-Entfernungsmesser 0,5 bis 50m
- Kleiner und handlicher Laser-Entfernungsmesser HP-800 zum Messen von Distanzen zwischen 0,5 und 50m auf 2mm genau, mit vielen praktischen Details, mit Schutzhülle und Tasche.
-
[1121] Drehzahlmesser (Umdrehungsmesser Tachometer) DT-2234C
- Digitales Laser-Handmessgerät zur berührungslosen Messung der Umdrehungsgeschwindigkeit, 2,5 bis 9.999 Upm, im Abstand von 50 bis 1000mm.
Estimated availability: Monday 15 March, 2010.
- Measurement - Calipers and micrometers:
In this category you will find calipers, depth gauge and micrometers
- Measurement - Multimeters:
This category contains measurement: digital multimeters and clamp meter, true rms multimeter
-
[1040] Digital Multimeter ACV, DCV, DCA, Ω, hFE, diode
- Digital Multimeter HP-33D with holster, for alternate- and direct voltage, direct current, resistance, diode- and transistor hFE test.
-
[1030] Multimeter V, A, Ω, with Network Cable Tester
- Multimeter VA-16 with RJ11 and RJ45-connectors to test netzwork cable. Measurement of alternate- and direct voltage, alternate and direct current, resistance, continuity- and diode test.
-
[1032] Multimeter V, A, Ω, F, Hz, °C, %rH, dB, Lux
- Multimeter VA-19 for direct- and alternate voltage, direct- and alternate current, Capacitance, frequency, diode- and continuity test, duty cicle, temperature, humidity, illuminance, sound level.
-
[1038] 2in1 Multimeter mit Spannungsdetektor
- Multimeter VA-21 mit AC Spannungsdetektor, mißt Gleich- und Wechsel- Strom- und Spannung, Widerstand, Kapazität, Frequenz, Dioden- und Durchgangstest sowie Temperatur.
Estimated availability: Monday 05 April, 2010.
-
[1031] Multimeter V, A, Ω, F, Hz, °C with USB interface
- Multimeter VA-18B with USB interface for direct- and alternate voltage, direct- and alternate current, resistance, capacitance, frequency, continuity- and diode test, as well as temperature.
Delivery time on request
-
[1041] Digital Multimeter with mailoperating blocker
- Digital Multimeter HP-760B, direct and alternate current and voltage, resistance, capacitance, frequency, transistor hFE- diode and continuity test, temperature
Estimated availability: .
-
[1045] Digital Multimeter with mailoperating blocker
- Digital Multimeter HP-760C, direct and alternate current and voltage, resistance, capacitance, frequency, transistor hFE- diode and continuity test, temperature
Estimated availability: Monday 15 March, 2010.
-
[1043] Digital Multimeter with Mailoperating Blocker
- Digital Multimeter HP-760D, with with mailoperating blocker, LCD and DC/AC voltage and current, resistance, capacitance, Transistor hFE- diode- and continuity test, temperature, frequency, duty cycle, inductance
-
[1042] Digital Multimeter, True RMS with Mailoperating Blocker
- Digital Multimeter HP-760D, ACV true RMS, with with mailoperating blocker, LCD and DC/AC voltage and current, resistance, capacitance, Transistor hFE- diode- and continuity test, temperature, frequency, duty cycle, inductance
-
[1036] Profi Multimeter, True RMS, V, A, Ω, F, Hz, USB-Interface
- Multimeter VA-38 with USB interface, for direct- and alternate voltage and current, resistance, capacitance, frequency, duty cicle, diode test.
-
[1049] Multimeter mit Zange Wechselstrom
- Zangen-Multimeter HP-3266A mit LCD (beleuchtet), zur Messung von Wechselstrom über Zange, Gleich- und Wechselspannung, Widerstand, sowie Dioden und Durchgangstest über Messkabel.
Estimated availability: Monday 15 March, 2010.
-
[1002] Clamp Multimeter, ACV, DCV, ACA, Ω, F, Hz, °C
- Clamp Multimeter HP-6900 with automatic range detection and LC-Display, keeping-bag and test leads. Measurement of alternate- and direct voltage, alternate current, resistance, capacitance, frequency, temperature, as well as diode and continue check.
-
[1005] Clamp Multimeter, ACV, DCV, ACA, DCA, Ω, F, Hz
- Clamp Multimeter HP-6910A auto range and LC-Display, keeping bag and test leads for measurement of direct- and alternate voltage, direct- and alternate current, resistance, capacitance, frequency, as well as diode and continuity check.
-
[1034] Clamp Multimeter VA-311, AC, DC, AV, DV, Ω, F, Hz, °C
- Clamp multimeter for direct and alternate current, direct and alternate voltage, resistance, capacitance, frequency (also with clamp), temperature, continuity and diode check.
-
[1050] Zangen-Multimeter bis 3000A, AC/DC, Echteffektivwert (True RMS)
- Multimeter mit Zange, HP-3000, mit Bargraph, Dual-Display, für Gleich- und Wechsel- Strom- und Spannung, ACA/ACV-Echteffektivwert-Messung (true RMS), Widerstand, Kapazität, Frequenz, Tastverhältnis, Dioden- und Durchgangstest und Temperatur
-
[1048] Multimeter mit Zange HP-6057 für AC Leckstrom
- Milliampere-Zangen-Multimeter HP-6057 mit LCD (beleuchtet), Meßkabel zur Messung von Gleich- und Wechselspannung, Wechselstrom 20mA - 200A, Widerstand, sowie Dioden und Durchgangstest.
-
[1051] Automotive-Multimeter ACV, DCV, DCA, Ω, °C, Upm
- Digital Multimeter HP-9810 with holster for direct and alternate voltage, direct current, resistance, diode- and continuity test, temperature, tachometer, dwell
- Measurement - Multimeters - Accessories:
Multimeter Accessories, e.g. test leads, test wires, thermocoupe, temperature probes
-
[0296] Banana to Banana Lead Set 500mm
- Banana to Banana Lead Set, Stackable banana plugs, Length: 500mm, color: red and black, 1mm²
-
[4620] Test Leads, 1000 mm, security banana to alligator clip
- Set of flexible measuring leads, length 1000 mm, red and black, PVC insulation, 1mm², security banana plug to krokodile clip
-
[9002] Test Leads for Multimeter with cowls
- 1 pair of multimeter measuring leads with protective cap for tip and plug, 1 x red, 1 x black.
-
[9015] Test Leads for Multimeter VA Series
- 1 pair of multimeter measuring leads, bend plug, with protective caps for tip and plug, 1 x red, 1 x black.
-
[9013] Meßpinzette für Multimeter
- Pinzette mit Meßspitzen und Anschlußkabel mit Schutzkappen
-
[9012] Temperature Sensor for Multimeter with Temperature Measurement
- Temperature sensor VA-3412, extra large, for multimeters with temperature measurement, with helix cable, -5 up to 400°C
-
[9010] Temperatur Sensor for Multimeter with Temperature Measurement
- Temperature sensor for multimeter with temperature measurement, with helix cable and 2 separate banana plugs
-
[9011] Temperature Sensor for Multimeter with Temperature Measurement
- Temperature sensor VA-3412, for multimeters with temperature measurement, with helix cable, -5 up to 400°C
-
[9014] Adaptor for Temperature Sensor
- Adaptor from flat pin plug to banana plug, for V&A multimeters.
-
[9020] Thermocouple for Multimeter with Temperature Measurement
- Multimeter thermal element for VA series
-
[9030] Tasche mit Reißverschluss, schwarz
- Tasche, mit innerer Seitentasche, verschließbar mit Reißverschluß, 110 x 200 x 45 mm
- Measurement - Infrared Thermometer:
IR thermometer for non-contact measurement: products with fixed and regulated emissivity.
-
[1028] Infrared Thermometer up to 100cm
- Infrared Temperatur Meter VA-6510 with laser and display backlight for non-contact measurement up to 150cm distance, measuring ratio 8:1.
Delivery time on request
-
[1024] Infrared Thermometer up to 150cm
- Infrared Temperatur Meter VA-6520 with laser and display backlight for non-contact measurement up to 150cm distance, measuring ratio 8:1.
Delivery time on request
-
[1063] Digital Infrared Thermometer 12:1, -30-550°C
- Digital infrared thermometer HP-880BK with laser, flashlight and display backlight for non-contact measurement, measuring ratio 12:1 and connection for thermocouple
-
[1027] Infrared Thermometer 12:1, emissivity adjustable
- Infrared Temperatur Meter VA-6532 with laser and display backlight for non-contact measurement, emissivity adjustable, measuring ratio 12:1.
-
[1181] Infrarot-Thermometer mit Thermoelement
- Infrarotthermometer VA-8090 mit Laser und Display-Beleuchtung zur berührungslosen Messung (-50 bis 300°C), mit zusätzlicher Kontaktmessung über Thermoelement (-200 bis 1300°C) im Transportkoffer
Estimated availability: Saturday 10 April, 2010.
- Power supplies:
electrical power supplies: regulated power supply
-
[4451] Adjustable Power Supply 30V/3A
- Digital lab grade regulated DC power supply McVoice NG-2930SB, 0-30V, 0-3A stabilized, 2 LCD displays.
-
[4501] Adjustable Power Supply 30V/3A
- Digital lab grade regulated DC power supply SAKO SK-1730 SL3A, 0-30V, 0-3A stabilized, 2 red LED displays.
-
[4470] Adjustable Power Supply 30V/3A, LCD
- Digital lab grade regulated DC power supply SAKO SK-1730 SBP3A, 0-30V, 0-3A stabilized, LCD.
-
[4502] Adjustable Power Supply 30V/5A
- Digital lab grade regulated DC power supply SAKO SK-1730 SL5A, 0-30V, 0-5A stabilized, 2 red LED displays.
-
[4504] Adjustable Double Output Power Supply 2 x 30V/5A
- Stabilized digital 2-channel lab grade regulated DC power supply SAKO SK-1731 SL5A, 2 x 0-30V, 0-5A, 1 x 5V/3A fix, 4 red LED displays.
-
[4541] Universal-Steckernetzteil 100-240V -> 3-12V 1200mA
- Steckernetzteil SNG-1200 mit Weitbereichs-Eingang 110-240V und 6 Ausgangsspannungen: 3/4,5/6/7,5/9/12V, 1200mA
-
[4449] Solar-Ladegerät HP-810B mit LED-Leuchte und V-LCD
- Ladegerät mit Solarzellen, internem Li-Ionen Akku und Taschenlampenfunktion, zum Laden von Akkus oder als Netzteil-Ersatz (6V)
-
[0296] Banana to Banana Lead Set 500mm
- Banana to Banana Lead Set, Stackable banana plugs, Length: 500mm, color: red and black, 1mm²
-
[0295] Banana to Banana Lead Set 1000mm
- Banana to Banana Lead Set, Stackable banana plugs, Length: 1000mm, color: red and black, 1mm²
-
[4510] Aligator Clips
- 1 pair of crocodile clips, length: 56 mm, insulated, with connector for banana plug, screw, red and black.
-
[0245] Set of 10 colored booted aligator clip wires
- Crocodile jumper clip lead set (10 pieces, 5 colors), 500 mm each
- Tools:
Solder and electronic kits, helping hand, magnifier lamp
-
[4610] Soldering Set with Accessoires
- Set with soldering iron and holder, desoldering pump, solder, solder flux, side cutters
-
[4613] Helping Hand with Magnifier
- Component holder from nickel-plated steel with 2 flexible clip terminals, magnifier (2.5-times) and heavy screw feet.
-
[5401] Kopflampe (Stirnlampe), 38LED, 4 Betriebsarten
- Kopflampe JSHL-G38, 90° schwenkbar, silber/schwarz, mit einstellbaren Stretchbändern, 38 LED und 4 Betriebsarten: schwach, mittel, hell, blinkend.
-
[5402] Kopflampe (Stirnlampe), 1W+14 LED, 3 Betriebsarten
- Kopflampe JSHL-D1W+14, 90° schwenkbar, orange/schwarz, mit einstellbaren Stretchbändern, 1W LED und 14 LED, davon 4 Farbwechsler, mit 3 Betriebsarten: 1W LED, 10 LED und Farbbwechseleffekte.
-
[4612] Tisch-Lupe 4 mit 2 LED, 90mm, 4 Dioptrien mit Zusatzlinse
- Lupe (90mm, 4 Dioptrien) mit flexiblem Metallschlauch und Standfuß, mit 2 LED und Zusatzlupe (21mm, 20 Dioptrien)
Estimated availability: Thursday 15 April, 2010.
-
[5106] Magnifying Task Lamp, 125 mm lens, 3 diopters, 22W, black
- Combination lamp magnifier as a desk lamp RT301, with 22W circle neon bulb and 125mm lens with 3 diopters, color: white.
-
[5108] Magnifying Task Lamp, 125 mm lens, 5 diopters, 22W, black
- Combination lamp magnifier as a desk lamp RT301, with 22W circle neon bulb and 125mm lens with 5 diopters, color: white.
- Soldering:
all you need for soldering: soldering stations, soldering kits, desoldering pumps
-
[4610] Soldering Set with Accessoires
- Set with soldering iron and holder, desoldering pump, solder, solder flux, side cutters
-
[4655S] Lötzange 230V mit 8 Paar Spitzen
- Lötkolben als Zange, 230V, 48W, mit 8 Paar Lötspitzen
-
[4701] Soldering Iron with Battery
- Battery solder iron with solder tip, 4,5V, 8W.
-
[4605] Soldering Station
- Temperature controlled solder station ZD-98, 180 - 480°C (350 - 900°F)
-
[4604] Soldering Station
- Temperature controlled solder station ZD-99, 150 - 480°C with solder iron and tip.
Estimated availability: Saturday 10 April, 2010.
-
[4600] Digital Soldering Station
- Temperature controlled solder Station ZD-931, with digital display of target- and actual temperature, including soldering iron with tip, iron holder and sponge in drawer.
Estimated availability: Saturday 10 April, 2010.
-
[4615] Digital regulated Soldering Station with pre-selction buttons
- Soldering Station ZD-937, 150°C - 450°C, 48W, with pre-selection buttons 100, 200, 300°C.
-
[4651] Digital Soldering Station
- Temperature controlled solder Station ZD-916, with digital display of target- and actual temperature in °C or °F, including soldering iron with tip.
-
[4652] Digital Desolder Station
- Desoldering station ZD-915 with short heating up desoldering gun, digital display with target and actual value of temperature
Estimated availability: Thursday 15 April, 2010.
-
[4622] SMD Hot Air Soldering Station with Display
- Regulated SMD hot air solder station ZD-939L, LCD, 320W, 150-500°C, with 4 nozzles
Estimated availability: Saturday 10 April, 2010.
-
[4640] Soldering Station with Soldering Iron and Desoldering Gun
- Combinated solder station ZD-917 with short heating up solder iron and desoldering gun, digital display with target and actual value of temperature
-
[4639] Soldering Station with Soldering Iron and Desoldering Gun
- Combinated solder station ZD-987 with short heating up solder iron and desoldering gun, digital display with target and actual value of temperature, ESD protection
Estimated availability: .
-
[4619] Soldering Station with Soldering Iron and Hot Air ZD-912
- Combinated solder station ZD-912 with short heating up solder iron and hot air, digital display with target and actual value of temperature
Estimated availability: .
-
[4621] Soldering Station with Soldering Iron and Hot Air ZD-982
- Combinated solder station ZD-982 with short heating up solder iron and hot air, digital display with target and actual value of temperature, ESD protection
- Soldering - Accessories+Replacement:
Accessories like Iron Stand, Smoke Absorber and Replacements like solder Iron, Heater, Desolerfing Gun
-
[4697] Smoke Absorber
- Remove noxious fumes quickly, safely, and efficiently.
-
[4613] Helping Hand with Magnifier
- Component holder from nickel-plated steel with 2 flexible clip terminals, magnifier (2.5-times) and heavy screw feet.
-
[4630] Desoldering Pump from Metal
- Desoldering pump in metal design with tip from teflon.
-
[4611] Desolering Pump with Heater
- Heatable desoldering pump with tip of metall, 30W, 230V
-
[9052] Lötkolbenablage mit Schublade und Schwamm, schwarz
- Ablage für Lötkolben mit Schwammschublade, auch passend als Ersatzteil für die Lötstation ZD-937
-
[9051] Lötkolbenablage mit Schublade und Schwamm, blau
- Ablage für Lötkolben mit Schwammschublade, auch passend als Ersatzteil für die Lötstation ZD-931
-
[4009] Soldering Iron for ZD-931 and ZD-937
- Solder iron as a spare part suitable for solder stations ZD-931 and ZD-937 as well as McVoice LS-1000 and LS-450, 24V, 48W, solder tip 1.5mm included.
-
[4641] Soldering Iron for ZD-916, ZD-912, ZD-917
- Solder iron ZD-415 as a spare part suitable for solder stations ZD-912, ZD-916, ZD-917, 24V, 80W, solder tip n4-2 1.0mm included.
Estimated availability: Saturday 10 April, 2010.
-
[4654] Soldering Iron for ZD-982, ZD-987
- Solder iron ZD-415 as a spare part suitable for solder stations ZD-982, ZD-987, 24V, 80W, solder tip n4-2 1.0mm included.
-
[4646] Desoldering Gun for ZD-915 and ZD-917
- Replacement desolder iron ZD-552, 24V, 80W (130W) including desoldering tip N5-2 (1,0mm), for desoldering station ZD-915 and combined solder station ZD-917
Estimated availability: Saturday 10 April, 2010.
-
[4656] Desoldering Gun for ZD-987
- Replacement desolder iron ZD-552C, 24V, 80W (130W) including desoldering tip N5-2 (1,0mm), for desoldering station ZD-987
-
[4661] Reinigungsnadeln für Entlötspitzen
- 1 Satz Reinigungsnadeln, bestehend aus je 1 Stück 0,8, 1,0 und 1,2 für die Entlötspitzen der Entlötpistole ZD-552 der Entlötstation ZD-915 und der Kombi-Lötstationen ZD-917 und ZD-987
-
[4705] Replacement parts for Desolder Stations
- Replacement parts for desoldering stations ZD-915, ZD-917, ZD-987: stand, 2 filters and fitting.
-
[4706] Replacement stand fpr ZD-10K
- Replacement stand for soldering stand ZD-10K, for soldering stations ZD-916 and ZD-912, 917, 982, 987
-
[4011] Soldering Sponge
- Replacement solder sponge 38 x 58mm, thickness 2mm used for solder stations
-
[4692] Heating Unit for Solder Iron ZD-915 (ZD-916, 917, 912)
- Heating element as spare part, 24V, 60W, suitable for soldering Iron ZD-915 of soldering stations ZD-916, ZD-917 and ZD-912
-
[4693] Heating Unit for hot air soldering iron
- Heating element as spare part, suitable for hot air soldering station ZD-939A and ZD-939BL, as well as the combined solder stations ZD-912 and ZD-982.
-
[4694] Heating Unit for Desoldering Gun
- Heating element as spare part, suitable for desoldering station ZD-915 as well as the combined soldering stations ZD-917 and ZD-987.
Estimated availability: .
- Soldering - Soldering Tips:
soldering tips
-
[4596] Soldering Tips for ZD-98 and ZD-99
- Set of Replacement soldering tips for soldering stations ZD-98 and ZD-99: 0.5, 1.5, 2.0mm
-
[4598] Soldering Tip 1.0mm for ZD-98 and ZD-99
- Replacement soldering tip 0.5mm for soldering stations ZD-98 and ZD-99
-
[4606] Soldering Tip 1.5mm for ZD-98
- Replacement soldering tip 1.5mm for solder station ZD-98 and ZD-99
-
[4608] Soldering Tip 2.0mm for ZD-98 and ZD-99
- Replacement soldering tip 2.0mm for soldering stations ZD-98 and ZD-99
-
[4642] Soldering Tip 0,4mm: ZD-912, ZD-916, ZD-917, ZD-982, ZD-987
- Replacement soldering tip N4-2, 0.4 mm, suitable for soldering iron ZD-415 of solder stations ZD-912, ZD-916, ZD917, ZD-982 or ZD-987
-
[4643] Soldering Tip 1.0mm ZD-917 u. ZD-912
- Replacement soldering tip N4-1, 1.0 mm, suitable for soldering iron ZD-415 of solder stations ZD-912, ZD-916, ZD-917, ZD-982, ZD-987
-
[4644] Soldering Tip 2.0mm ZD-917 u. ZD-912
- Replacement soldering tip N4-4, 2.0 mm, suitable for soldering iron ZD-415 of solder stations Zd-912, ZD-916, ZD-917, ZD-982, ZD-987
-
[4645] Soldering Tip 3.0mm ZD-917 u. ZD-912
- Replacement soldering tip N4-3, 3.0mm, suitable for soldering iron ZD-415 of solder stations ZD-912, ZD-916, ZD-917, ZD-982, ZD-987
-
[4647] Desoldering Tip 0.8mm
- Replacement desoldering tip N5-2, 0.8mm, suitable for desoldering gun ZD-552 of the soldering station ZD-917
-
[4648] Desoldering Tip 1.0mm
- Replacement desoldering tip N5-1, 1.0mm, suitable for desoldering gun ZD-552 of the soldering station ZD-917
-
[4649] Desoldering Tip 1.3mm
- Replacement desoldering tip N5-3, 1.3mm, suitable for desoldering gun ZD-552 of the soldering station ZD-917
-
[4601B] Sodering Tips 1.0/1.5/2.0/3.0 mm, ZD-931+937
- 4 pieces of replacement soldering tips (1.0/1.5/2.0/3.0 mm), suitable for the solder iron 88-201A of solder stations ZD-931 and ZD-937, respectiveley for McVoice LS-450 and LS-1000
Estimated availability: Saturday 10 April, 2010.
-
[4601] Soldering Tip 1.0 mm for ZD-931 and ZD-937
- Replacement soldering tip 1.0 mm, suitable for the solder iron 88-201A of solder stations ZD-931 and ZD-937, as well as for McVoice LS-450 and LS-1000
Estimated availability: Saturday 10 April, 2010.
-
[4012] Soldering Tip 1.5 mm for ZD-931 and ZD-937
- Replacement soldering tip 1.5 mm, suitable for the solder iron 88-201A of solder stations ZD-931 and ZD-937, as well as for McVoice LS-450 and LS-1000
-
[4602] Soldering Tip 2.0 mm for ZD-931 and ZD-937
- Replacement soldering tip 2.0 mm, suitable for solder iron 88-201A of solder stations ZD-931 and ZD-937, as well as for McVoice LS-450 and LS-1000
Estimated availability: Saturday 10 April, 2010.
-
[4603] Soldering Tip 3.0mm for ZD-931 and ZD-937
- Replacement soldering tip 3.0 mm, suitable for the solder iron 88-201A of solder stations ZD-931 and ZD-937, as well as for McVoice LS-450 and LS-1000
Estimated availability: Saturday 10 April, 2010.
- Soldering - Nozzles:
Hot Air Nozzles for hot air solder stations (nozzles)
-
[4671] SMD-nozzle for hot-air-soldering, diameter 2.5mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4672] Nozzle for hot-air-soldering, 10x10mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4673] Nozzle for hot-air-soldering, 15x15mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4674] Nozzle for hot-air-soldering, 19x19mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4675] Nozzle for hot-air-soldering, 15x21mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4676] Nozzle for hot-air-soldering, 29x29mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4677] SMD-nozzle for hot-air-soldering, diameter 4.4mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4678] Nozzle for hot-air-soldering, 4.8x10mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4679] Nozzle for hot-air-soldering, 5.7x10mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4680] Nozzle for hot-air-soldering, 7.2x16mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939A and SMD-01
-
[4681] Nozzle for hot-air-soldering, 7.2x19mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
-
[4682] Nozzle for hot-air-soldering, 1.5x3mm
- Nozzle suitable for hot air solder station ZD-912, ZD-982, ZD-939 and SMD-01
- Soldering - Consumable:
soldering wire, desoldering wire, heater, filter
-
[4635] Solder Wick 1.5mm, 1.6m
- 1 coil of soldering remover, width: 1.5mm, length: 1,6m
Estimated availability: .
-
[4008] Solder Wire 0.5mm
- Lead free solid solder wire, 100g spool, 30m, diameter: 0.5mm
-
[4631] Solder Wire 1mm
- Lead free solid solder wire, 10g spool, 2m, diameter: 1mm
-
[4633] Solder Wire 1mm
- Lead free solid solder wire in a dispenser, 20g, diameter: 1mm
-
[4634] Solder Wire 1.2mm
- Lead free solid solder wire in a dispenser, 20g, diameter: 1.2mm
-
[4632] Solder Paste Flux
- Soldering paste flux ZD-170, 50g
-
[4692] Heating Unit for Solder Iron ZD-915 (ZD-916, 917, 912)
- Heating element as spare part, 24V, 60W, suitable for soldering Iron ZD-915 of soldering stations ZD-916, ZD-917 and ZD-912
-
[4693] Heating Unit for hot air soldering iron
- Heating element as spare part, suitable for hot air soldering station ZD-939A and ZD-939BL, as well as the combined solder stations ZD-912 and ZD-982.
-
[4694] Heating Unit for Desoldering Gun
- Heating element as spare part, suitable for desoldering station ZD-915 as well as the combined soldering stations ZD-917 and ZD-987.
Estimated availability: .
- Lamps + Light:
Lams, magnifier lamps
-
[5401] Kopflampe (Stirnlampe), 38LED, 4 Betriebsarten
- Kopflampe JSHL-G38, 90° schwenkbar, silber/schwarz, mit einstellbaren Stretchbändern, 38 LED und 4 Betriebsarten: schwach, mittel, hell, blinkend.
-
[5402] Kopflampe (Stirnlampe), 1W+14 LED, 3 Betriebsarten
- Kopflampe JSHL-D1W+14, 90° schwenkbar, orange/schwarz, mit einstellbaren Stretchbändern, 1W LED und 14 LED, davon 4 Farbwechsler, mit 3 Betriebsarten: 1W LED, 10 LED und Farbbwechseleffekte.
-
[4612] Tisch-Lupe 4 mit 2 LED, 90mm, 4 Dioptrien mit Zusatzlinse
- Lupe (90mm, 4 Dioptrien) mit flexiblem Metallschlauch und Standfuß, mit 2 LED und Zusatzlupe (21mm, 20 Dioptrien)
Estimated availability: Thursday 15 April, 2010.
-
[5165] Tisch-Lupenleuchte 90 mm, 3 Dioptrien, 3,5W LED, weiß
- LED-Lupenlampe als Tischleuchte, Farbe weiß, 3,5W (60 LED, 1100Lux), Kunststoff-Lampenschirm mit 90mm Linse aus Glas, 3 Dioptrien, mit Zusatzlinse für 8 Dioptrien.
-
[5166] Tisch-Lupenleuchte 90 mm, 3 Dioptrien, 3,5W LED, schwarz
- LED-Lupenlampe als Tischleuchte, Farbe schwarz, 3,5W (60 LED, 1100Lux), Kunststoff-Lampenschirm mit 90mm Linse aus Glas, 3 Dioptrien, mit Zusatzlinse für 8 Dioptrien.
-
[5155] Gelenkarm-Lupenleuchte 125 mm, 3 Dioptrien, 22W, weiß
- Kaltlicht-Lupenlampe, Farbe weiß, als Gelenkarm-Leuchte mit Tischklemme, 22W Leuchtstoffring, Kunststoff-Lampenschirm mit 125mm Linse aus Glas, 3 Dioptrien.
Estimated availability: .
-
[5156] Gelenkarm-Lupenleuchte 125 mm, 5 Dioptrien, 22W, weiß
- Kaltlicht-Lupenlampe, Farbe weiß, als Gelenkarm-Leuchte mit Tischklemme, 22W Leuchtstoffring, Kunststoff-Lampenschirm mit 125mm Linse aus Glas, 5 Dioptrien.
Estimated availability: .
-
[5131] Magnifying Task Lamp, 125 mm lens, 5 diopters, 22W, white
- Combination lamp magnifier as a desk lamp RT301, with 22W circle neon bulb and 125mm lens with 5 diopters, color: white.
-
[5105] Magnifying Task Lamp, 125 mm lens, 3 diopters, 22W, white
- Combination lamp magnifier as a desk lamp RT301, with 22W circle neon bulb and 125mm lens with 3 diopters, color: white.
-
[5106] Magnifying Task Lamp, 125 mm lens, 3 diopters, 22W, black
- Combination lamp magnifier as a desk lamp RT301, with 22W circle neon bulb and 125mm lens with 3 diopters, color: white.
-
[5107] Magnifying Task Lamp, 125 mm lens, 5 diopters, 22W, white
- Combination lamp magnifier as a desk lamp RT301, with 22W circle neon bulb and 125mm lens with 5 diopters, color: white.
-
[5108] Magnifying Task Lamp, 125 mm lens, 5 diopters, 22W, black
- Combination lamp magnifier as a desk lamp RT301, with 22W circle neon bulb and 125mm lens with 5 diopters, color: white.
-
[5101] Magnifying Task Lamp, 190x157mm, 2x9W, 3 diopters, 22W, white
- Combination lamp magnifier as a desk lamp RT111, with 2x9W neon bulb and lens with 3 diopters, color: white.
-
[5150] Gelenkarm-Lupenleuchte 190x157mm, 2x9W, 5 Dioptrien, weiß
- Weiße Kaltlicht-Lupenleuchte als Gelenkarm-Leuchte mit Tischklemme, 2x9W Leuchtstofflampen und 190x157mm Linse aus Glas mit 5 Dioptrien, Staubschutz, Farbe: weiß
Estimated availability: .
-
[5163] Gelenkarm-Lupenleuchte 125 mm, 5 Dioptrien, 90 LED, weiß
- Kaltlicht-Lupenlampe, Farbe weiß, als Gelenkarm-Leuchte mit Tischklemme, Leuchtmittel 90 LED, 7W, 1000 Lux, Kunststoff-Lampenschirm mit 125mm Linse aus Glas, 5 Dioptrien.
Estimated availability: .
-
[5161] Gelenkarm-Lupenleuchte 190x157mm, LED 6,5W, 5 Dioptrien, weiß
- Weiße LED-Lupenleuchte mit 1000Lux als Gelenkarm-Leuchte mit Tischklemme, 6,5W LED (80 Stück) und 190x157mm Linse aus Glas mit 5 Dioptrien, Staubschutz, Farbe: weiß
-
[5110] Stand with rolls for Magnifying Task Lamp, white
- Massive stand TS-5 for magnifying task lamp with bracket with 5 rolls, height: 760mm, color: white.
-
[5101S] Magnifying Task Lamp with Stand, 2x9W, 3 diopters, 22W, white
- Combination lamp magnifier RT111 with roll stand, 2x9W neon bulb and lens with 3 diopters, color: white.
-
[5105S] Magnifying Task Lamp with Stand, 125 mm, 3 diopters, 22W, white
- Combination lamp magnifier RT301, with roll stand, 22W circle neon bulb and 125mm lens with 3 diopters, color: white.
-
[5107S] Magnifying Task Lamp with Stand, 125 mm, 5 Diopters, 22W, white
- Combination lamp magnifier RT301, with roll stand, 22W circle neon bulb and 125mm lens with 5 diopters, color: white.
-
[5150S] Gelenkarm-Lupenleuchte mit Rollstativ, 2x9W, 5 Dioptrien, weiß
- Weiße Kaltlicht-Lupenleuchte als Gelenkarm-Leuchte mit Rollstativ, 2x9W Leuchtstofflampen und 190x157mm Linse aus Glas mit 5 Dioptrien, Staubschutz, Farbe: weiß
Estimated availability: .
-
[5155S] Gelenkarm-Lupenleuchte mit Rollstativ 125 mm, 3 Diopt. 22W, weiß
- Kaltlicht-Lupenlampe mit Rollstativ, Farbe weiß, als Gelenkarm-Leuchte mit 22W Leuchtstoffring, Kunststoff-Lampenschirm mit 125mm Linse aus Glas, 3 Dioptrien.
Estimated availability: .
-
[5156S] Gelenkarm-Lupenleuchte mit Rollstativ 125 mm, 5 Diopt. 22W, weiß
- Kaltlicht-Lupenlampe mit Rollstativ, Farbe weiß, als Gelenkarm-Leuchte mit 22W Leuchtstoffring, Kunststoff-Lampenschirm mit 125mm Linse aus Glas, 5 Dioptrien.
Estimated availability: .
-
[5120] Cover for Magnifying Task Lamp
- Cover for the circle neon bulb of magnifying task lamp RT301.01
-
[5121] Cover for Magnifying Task Lamp
- Cover for the circle neon bulb of magnifying task lamp 8606 (without screws)
- Lamps + Light - Illuminant:
You will find illuminant such as LED for different sockets (MR16, GU10, E27) as well as neon lamps for magnifying task lamps.
-
[5176] Leuchtmittel E27 Birne, 21 LED RGB Effektglas Lichtwechsel 230V
- LED-Strahler ähnlich einer Glühbirne mit 21 LED, Fassung E27 (große Schraubfassung), 230V, aus Effektglas, mit Lichtwechseln.
-
[5205] Leuchtmittel E27, 140 LED Strahler, 230V, 8W, warmweiß
- LED-Fluter mit insgesamt 8W, 140 LED, Fassung E27 (große Schraubfassung), 230V, warmweißes Licht, Abstrahlwinkel 120°, Lichtstrom ca. 310 lm
Delivery time on request
-
[5175] Leuchtmittel E27 Birne mit 22 LED, 1,8W, 230V, warmweiß
- LED-Strahler ähnlich einer Glühbirne mit insgesamt 1,8W, 22 LED, Fassung E27 (große Schraubfassung), 230V, aus PBT, warmweißes Licht.
Estimated availability: Thursday 15 April, 2010.
-
[5178] Leuchtmittel: Kerze mit 22 LED, 1,8W, 230V, E14, warmweiß
- LED-Strahler ähnlich einer Glühbirne in Kerzenform mit insgesamt 1,8W, 22 LED, Fassung E14 (kleine Schraubfassung), 230V, aus PBT, warmweißes Licht.
Estimated availability: Thursday 15 April, 2010.
-
[5204] Leuchtmittel E27 Birne, 5 LED, 5W, 230V, warmweiß
- LED-Strahler ähnlich einer Glühbirne mit 5x1W LED, Fassung E27 (große Schraubfassung), 230V, warmweißes Licht, ca. 320-350 lm.
-
[5206] Leuchtmittel E27 Strahler, 80 LED, 230V, 5W, warmweiß
- LED-Fluter mit insgesamt 5W, 80 LED, Fassung E27 (große Schraubfasssung), 230V, warmweißes Licht, Abstrahlwinkel 120°, Lichtstrom ca. 260 lm
-
[5210] Leuchtmittel E14 Strahler, 80 LED, 230V, 5W, warmweiß
- LED-Fluter mit insgesamt 5W, 80 LED, Fassung E14 (kleine Schraubfasssung), 230V, warmweißes Licht, Abstrahlwinkel 120°, Lichtstrom ca. 260 lm
-
[5210.10] 10 Stück Leuchtmittel E14 Strahler, 80 LED, 230V, 5W, warmweiß
- 10 Stück LED-Fluter mit insgesamt 5W, 80 LED, Fassung E14 (kleine Schraubfasssung), 230V, warmweißes Licht, Abstrahlwinkel 120°, Lichtstrom ca. 260 lm
-
[5190] Leuchtmittel GU10, Spot 3 x 1W LED, 230V, warmweiß
- LED-Strahler mit insgesamt 3W, 3 LED, Fassung GU10 (Bajonett), 230V, mit Aluminium-Kühlkörper, warmweißes Licht, 130-150 lm
Estimated availability: Tuesday 30 March, 2010.
-
[5192] Leuchtmittel GU10, Strahler mit 80 LED, 5W, warmweiß, 230V
- LED-Fluter mit insgesamt 5W, 80 LED, Fassung GU10 (Bajonett), 230V, warmweißes Licht, Abstrahlwinkel 120°, Lichtstrom 260 lm
Estimated availability: Tuesday 30 March, 2010.
-
[5193] Leuchtmittel GU10, Strahler mit 140 LED, 8W, warmweiß, 230V
- LED-Fluter mit insgesamt 8W, 140 LED, Fassung GU10 (Bajonett), 230V, warmweißes Licht, Abstrahlwinkel 120°, Lichtstrom ca. 310 lm
-
[5181] Leuchtmittel MR16, Spot mit 3 LED, 12V Strahler 3 x 1W warmweiß
- LED-Strahler mit insgesamt 3W, 3 LED, Fassung MR16 (2 Stifte), 12V AC/DC, mit Aluminium-Kühlkörper, warmweißes Licht, Abstrahlwinkel 45°, Lichtstrom 120 lm
Estimated availability: Tuesday 30 March, 2010.
-
[5182] Leuchtmittel MR16, Strahler mit 60 LED, 12V Spot 3,6W, warmweiß
- LED-Fluter mit 3,6W, 60 LED, Fassung MR16 (2 Stifte), 12V AC/DC, mit Aluminium-Kühlkörper, warmweißes Licht, Abstrahlwinkel 120°, Lichtstrom ca. 210 lm
-
[1010] Neonring 22W für RT301 u. 8606
- Ersatz-Neonring für Lupenleuten RT301 und 8606, sowie LTS-120
-
[5122] Illuminant for Magnifying Task Lamp
- Lamp, 9W, 6400K, for the magnifying task lamp RT111.01
- Air Purifier:
Air purifier for home, office or laboratory, with different filters: HEPA, activated carbon, photocatalyst, static plasma, ion, ozon, uv. Replacement filters and lamps.
-
[5040] Mini-Luftreiniger 12V, 12m³, HEPA, Aktivkohle, Ionengenerator
- Raumluftreiniger Baren B727BL, sehr leise, geringer Stromverbrauch, 2-fach Filter (HEPA und Aktivkohle), zusätzlich UV-Licht, Infrarot, Ionisator und Aromafunktion, 12V Gleichstrom
-
[5041] Mini-Luftreiniger 5V, 12m³, HEPA, Aktivkohle, Ionengenerator
- Raumluftreiniger Baren B737BL, sehr leise, geringer Stromverbrauch, 2-fach Filter (HEPA und Aktivkohle), zusätzlich UV-Licht, Infrarot, Ionisator und Aromafunktion, 5V Gleichstrom, für ca. 12m³
-
[5010] Luftreiniger für ca. 75m³ (30m²) mit Ozon u. Aroma
- Raumluftreiniger Baren B-757B für ca. 75m³, leise, geringer Verbrauch, mit Fernbedienung, Grundreinigung durch HEPA- und Aktivkohlefilter, sowie zuschaltbare Ozon-, Fotokatalysator- und UV-Funktion sowie Ionisator und Aroma-Zugabe.
-
[5030] Luftreiniger für ca. 115m³ (46m²) mit Sensor, Ozon, Schlaf-Funkt
- Raumluftreiniger Baren B785 für ca. 115m³, sehr leise, geringer Verbrauch, mit Fernbedienung, 3-fach Filter (HEPA, Aktivkohle, Kohlefaser), zusätzlich UV-Licht, Fotokatalysator, Ionisator, Ozongenerator, Geruchs- u. Partikelsensor, Schlafzimmerfunktion
-
[5020] Luftreiniger, 150m³, 60m², Geruchs- und Partikelsensor, HEPA
- Raumluftreiniger Baren B767B für ca. 150m³, leise, geringer Verbrauch, mit Fernbedienung, 4-fach Filter (HEPA, Aktivkohle, Fotokatalysator, Elektrostatik-Plasma), zusätzlich UV-Licht und Ionisator sowie Partikel- und Geruchssensor.
-
[5019] Refill Package for Air Purifier B-757B
- Replacement filter: HEPA, activated carbon and photocatalyst filter as well as UV lamp and aroma refill.
-
[5039] Refill Package for Air Purifier B-785
- Replacement filter: HEPA, activated carbon and photocatalyst, Carbon fibre filter as well as UV lamp.
-
[5029] Refill Package for Air Purifier B-767B
- Replacement filter: HEPA, activated carbon and photocatalyst filter as well as UV lamp.
-
[5049] Refill Package for Air Purifier B-727 and B-737
- Replacement filter: HEPA/activated carbon and aroma package
- Miscellaneous + Remnats:
All what you cannot find in other category, above all remnats and special items.
|
|
|
|
Measurement
EHI certificated online shop
Superbe station de soudure. Belle contruction. Un grand merc..
